How to Adjust a Garage Door Spring
Your home’s garage door is a complex system of moving parts working simultaneously to provide you with convenient, reliable and secure entry to your home. With consistent daily use, it’s common for several parts of your garage door to succumb to normal wear and tear over time.
Most at risk are springs and cables, which are under an extreme amount of tension, weight and pressure. If these parts fray or loosen, you may find that your garage door does not want to open when prompted, will only partially open or may hang at an angle. To properly repair your door, you’ll need to tighten your garage door torsion spring or adjust the cables.
Different Types of Garage Door Springs and Cables
Of your garage door’s system, the springs and cables are among the most important pieces contributing to smooth, safe movement. These parts use force to counterbalance the weight of the door and control its overall motion and tension, allowing the garage door to easily move up and down. When making repairs to your garage door, it’s important to understand what type of cable and spring system your door has. Most doors either have torsion or extension spring and cable operations.
- Torsion Springs and Cables: Of the two types of springs, torsion springs are the most commonly used in today’s garage doors. Torsion springs sit at the top of the garage door and slide into a channel while the door is in operation. These springs are available in several sizes based on the garage door’s weight, height and track radius. Along with the torsion spring are cables that are attached to the bottom of the door with a loop at one end and stop at the other.
- Extension Springs and Cables: While an older garage door spring option, extension springs are still popular because they’re less expensive than torsion springs. They occupy less overhead space because they’re installed on either side of the door and extend when it’s opening and closing. Extension cables are available in standard options that are attached on each side of the door or as safety cables that are threaded through the spring. If the spring every breaks, the cable will catch both ends and prevent it from flying throughout the garage.
How to Handle Problems With Garage Door Torsion Springs and Cables
When your garage door springs and cables are too loose, you’ll notice your door struggling to open — the door will be too heavy for the opener to raise and lower alone. Before you break out your tools and try to begin any garage door spring tightening tasks, it’s important to note that because the springs are under extreme weight and tension, it’s remarkably dangerous for inexperienced homeowners to make repairs or garage door spring adjustments themselves.
A garage door’s springs, drums, brackets and lifting cables work together to make your door function properly, and you’d need to know how each works in conjunction with the others to attempt a repair. Without the right tools and knowledge, you could cause serious injuries to yourself and those around you.
A malfunctioning spring can cause your garage door to slam shut on anything in its path. This exact situation has caused many lacerations, broken bones and even deaths. That’s why it’s essential to trust your garage door spring repair to a qualified service professional.
A garage door professional will examine your door for any potential problems before using the proper tools to perform a repair. They’ll secure the door in place and tighten the spring to ensure a proper fit. While the technician is tightening your garage door torsion spring, they can also adjust the cables if needed by moving them further down the frame, securing them into a new hole and using pliers to make sure the cable bracket is taut.
For Help With Your Garage Door Spring Adjustment, Call RCS Carolina Garage Doors
Making adjustments to your garage door can be hazardous for inexperienced homeowners, so when you need to tighten your garage door springs and cables, trust the highly trained and knowledgeable technicians at RCS Carolina Garage Doors. We have over 20 years of garage door repair and maintenance experience throughout North and South Carolina, including the Charlotte, Huntersville and Matthews areas.
To learn more about our garage door spring adjustment and repair services, call us today at 704-523-8063 or complete our online contact form to request services.
Garage Door Won’t Open or Close
When leaving for work this morning, was your garage door refusing to either open or close? While an uncooperative garage door is inconvenient for homeowners, it’s common for them to experience problems opening and closing due to the constant strain, pressure and weight they’re under.
The most typical reasons your garage door won’t open or close are related to mechanical issues or a garage door opener motor malfunction. Some of these garage door issues can be easily repaired with a few adjustments, while others are more complicated or hazardous for homeowners to replace themselves and require the assistance of a local garage door repair company.
Common Reasons Your Garage Door Won’t Open or Close
If you’re trapped inside your garage or stuck outside of it, note whether the garage door either won’t open all the way, won’t open with the remote or if the motor is running but the door won’t rise. If your garage door won’t even open manually, you have a serious problem. To determine the cause of your garage door malfunction, it’s best to understand the possible cause of why it won’t open or close and try several safe troubleshooting methods to attempt solving the problem.
The most common causes of why a garage door won’t open include:
- Broken Springs: Having broken torsion or extension springs is among one of the most common reasons why a garage door won’t properly open. Springs are designed to last a determined number of cycles before finally wearing and breaking. Torsion springs will last up to 20,000 cycles, while extension springs are expected to reliably function up to 10,000 cycles. Once the springs have broken, the door is too heavy to be lifted by the motor alone and must be replaced in order to restore movement.
- Worn Cables: Like the garage door torsion or extension springs, cables are also responsible for controlling smooth, safe and reliable garage door movement. Typically, when the garage door springs break, the cables will also need to be replaced. Due to the dangerous nature of replacing garage door springs and cables, replacement efforts should be performed by a professional.
- Dead Remote Batteries: Sometimes repairing your garage door requires the simplest solution. If you’re pressing the button on your garage door remote but the door won’t raise or lower, then a likely cause is that the batteries are dead. Garage door batteries last approximately two years before needing replacement. Homeowners can quickly and easily switch their remote batteries by removing the back panel and inserting fresh batteries. If the remote still won’t operate the door, make sure you’re within range of the opener. If the door opens with the remote when you’re within 20 feet of it, but won’t raise when you’re down the street, then you’re likely out of the opener’s range.
- Stripped Garage Door Opener Gear: A stripped garage door opener gear is typically caused when the door is too heavy for the opener to lift and there’s too much strain. If this is the case, you’ll hear a humming or grinding noise emitting from the opener as it struggles to lift and lower the door. To solve this issue, either replace the damaged gear or consider upgrading your opener to a model that is better equipped to operate the door.
- Lock Mode Engaged: Another simple solution for solving why your garage door won’t open or close is making sure the lock switch on the opener isn’t engaged. The lock button is likely placed on your wall-mounted garage door panel, and pressing this button for too long will activate the opener’s lock mode. Easily switch this setting off by pressing the lock button.
For Quality Garage Door Repairs, Contact RCS Carolina Garage Doors
For the best, most knowledgeable and reliable garage door repair and maintenance services throughout North and South Carolina, contact your local, skilled experts at RCS Carolina Garage Doors. We have over 20 years of experience serving homeowners throughout the Charlotte area and beyond. We believe in offering our customers affordable, quality garage door services using only the best products and materials available to guarantee lasting, dependable repairs.